The PICO1TRC is a physical computing board that is compatible with the
Arduino software environment. The board size is 2.1" x 1.65".
All I/O pins from the ATmega328 are
brought out on 2 rows of 14 pins (300mil spacing). See the
PICO1TRC datasheet
for the
assembly instructions, schematic and bill-of-materials.
Features
- 2.1" x 1.65"
- Replaceable and upgradeable CPU (ATmega168 or ATmega328)
- Compatible with the Arduino development tools.
- Adjustable Linear Regulator (Vcc 3.3V - 5V)
Output voltage is set by changing one resistor.
Resistors for 3.3V and 5V are included.
- RTC Features
- Real-Time Clock (RTC) counts Seconds,
Minutes, Hours, Day, Date, Month, and Year
with Leap-Year Compensation Valid Up to
2100
- Two Time-of-Day Alarms
- Programmable Square-Wave Output
- Backup power from a CR1220 coin cell.
- I2C Serial Interface
- Two rows of 14 pins (300mil spacing) with all ATmega168/328 I/O functions.
- Six pin header for an FTDI TTL-232R-3V3 cable.
- Debug LED that can be jumpered to Pin 7 or disconnected.
- A/D reference supply filtered per Atmel specification.
- Reset circuit per Atmel specification.
Pricing
| Part Number
| Description
| Price | Qty
|
| | PICO1TRC-KIT
| datasheet
| Small, low-cost ATmega328 Kit with RTC
| 10.00USD | | 1
|
| |
|
|
| 10.00USD | | 1
|
|
| | PICO1TRC-KIT-F
| datasheet
| PICO1TRC + FTDI-TTL-232R-3V3 Cable
| 30.00USD | | 1
|
| |
|
|
| 30.00USD | | 1
|
|
|
PICO1TRC-KIT Component List
| Item Number
| Quantity
| Description
|
| | 1
| 1
| connector, battery, CR1220
| | 2
| 5
| capacitor, ceramic, 0.1uF, 10%, 50V, X7R
| | 3
| 2
| capacitor, ceramic, 20pF
| | 4
| 2
| capacitor, Nichicon UPW1E100MDD
| | 5
| 1
| diode, 1N4148
|
| | 6
| 1
| LED, T1, Green
| | 7
| 2
| diode, BAT41
| | 8
| 1
| header, 3x1, 100mils
| | 9
| 1
| header, 6x1, 100mils
| | 10
| 1
| power jack, 2.1mm
|
| | 11
| 1
| inductor, 10uH, 10%
| | 12
| 4
| resistor, 10K, 1/8W, 1%
| | 13
| 1
| resistor, 374 Ohm, 1/8W, 1%
| | 14
| 1
| resistor, 124 Ohm, 1/8W, 1%
| | 15
| 1
| resistor, 205 Ohm, 1/8W, 1%
|
| | 16
| 1
| pushbutton
| | 17
| 1
| ATmega168-20PU
| | 18
| 1
| voltage regulator, adj, 800mA, TO-220
| | 19
| 1
| IC, RTC, DS1337+
| | 20
| 1
| crystal, 12MHz, 20pF, HC49US
|
| | 21
| 1
| crystal, 32.768KHz, 6pF, 2x6mm package
| | 22
| 1
| DIP Socket, 8 Pin, 300mil centers
| | 23
| 1
| Shunt with handle
| | 24
| 1
| DIP Socket, 28 Pin, 300mil centers, Wire Wrap
| | 25
| 1
| wiblock_PICO1TRC-PCB
|
| | 26
| 1
| resistor, 1K, 1/8W, 1%
|
|
|
Educational Kits and Rapid Prototyping Tools
The PICO1TRC is a physical computing board that is compatible with the
Arduino software environment. The board size is 2.1" x 1.65".
All I/O pins from the ATmega328 are
brought out on 2 rows of 14 pins (300mil spacing). See the
PICO1TRC datasheet
for the
assembly instructions, schematic and bill-of-materials.
